Cantilever Rack in Atlanta, GA
Long Stock, No Front Columns.
Store Long Stock Right
What Cantilever Rack Solves for Long Stock
Quick answer
Uprights with arms projecting from one or both sides, and no front column. That open face is the entire point: long material loads from the side and is limited by arm capacity and spacing rather than by a bay opening.
Cantilever removes the obstruction
A fork truck drives parallel to the rack face and sets the load onto the arms from the front, with nothing in the way.
What You Would Store on It
Applications
Anything long, awkward or unpalletized that a standard bay would fight.
Arms, Uprights, and Bases
Specification
What Buyers Check Before Ordering
FAQ
If your question isn't here, call the shop. We'd rather talk it through than have you guess.
Can you install it without clearing the yard?
Usually. Cantilever goes up run by run, so we can install one bay line while you keep working the next, then move stock across.
What does cantilever cost against pallet racking?
More per foot of steel, because the arms carry load without a front column. Per storage position for long material it is normally the cheaper answer, since racking wastes the bay.
Can cantilever rack be used outdoors?
Yes, with a galvanized or painted finish and appropriate foundation design. Outdoor installations often require a roof structure so the material isn't exposed. Slab or foundation design matters more outdoors than in.
Do you handle the permit and inspection?
Our cantilever installations include the permit and the inspection, plus a slab check before ordering, because cantilever concentrates load into narrow bases and a slab poured for forklift traffic does not always take it.
Roll-formed or structural, which do we need?
Arm loading and impact exposure decide it. Roll-formed is lighter and cheaper. Structural takes forklift knocks and higher arm loads without deforming. The tool above gives you a starting answer.
Can you inspect it later?
Yes, rack inspection is one of our own services, and cantilever is worth inspecting because bent arms are easy to miss and load-critical.
Tell Us What You Are Storing
Start a cantilever project
Length, weight per length, how deep it stacks, how many levels you need and whether you can work both sides.
We visit, confirm conditions ourselves, and return a proposal with drawings, full scope of supply and pricing.
