Innovation is evident in every Motovario product, from the unique heat-sink design of the NMRV® series worm gear reducers, to the lightweight aluminum housings of the in-line helical HA and helical bevel BA reducers, to the overall design of the SmartBox™ in-line helical H Series, helical bevel B Series and parallel helical S Series. Motovario constantly challenges its products and methods and continually exceeds customers’ expectations to remain the innovative Team in Power Transmission. Motovario is represented in Georgia and Alabama by Power and Motion Ind Sales. P&M is the outside sales force for Motovario. 770-529-0418
Motovario SmartBox™ was designed to be the most competitive high-efficiency gear reducer series in today's market.
The Modularity Concept of Motovario SmartBox™ means modular production and modular assembly for modular gear reducers. SmartBox™ is built with standardized parts, sharing gears, shafts, input sets and output shafts and flanges. SmartBox™ gear reducers are easily adapted for any application.
SmartBox™ introduces key design changes that reflect Motovario's commitment to innovation:
The flexible motor coupling maximizes start and stop shock load capacity, eliminates fretting corrosion between the motor shaft and the input quill, increases the input oil seal's life and easily adapts for NEMA, IEC and servo motor applications.
The SmartParts™ system standardizes parts throughout the SmartBox™ series, lowering cost, shortening lead times and increasing application flexibility.
SmartBox™ reducers feature the PowerCase™: one-piece castings of the main housing that enable the reducer to transmit more torque.
The PowerCase™ also allows for more distance between support bearings, distributing loads better and increasing overhung load ratings.
PowerCase™ uses the interchangeable input sets of the SmartParts™ system, so each reducer's power section can be tailored for maximum torque.
Motovario gearbox plant tour
Worm gear reducers, combined and with pre-stage reduction unit
Available versions: NMRV - fitted for motor coupling, NRV - with input shaft, NMRL - with torque limiter
Power up to 15 kW
Patented case with modern design
Aluminuium units are supplied complete with synthetic oil which allows universal position mounting, with no need to modify lubricant quantity. Moreover units without plugs reduce the risk of oil oxidation and contamination.
Reduction ratios between 5 and 100
Max torque 1.550 Nm and admissible radial loads max 16.500 N
Cases up to 105 in die-cast aluminium alloy and over 110 in G200 grey cast iron
Worm wheel: bronze Cu Sn12 Ni2 (UNI7013-10)
Ground worm profile ZI (UNI4760)
Excellent mechanical strength while being especially lightweight
Load capacity calculated to BS721-83 and verified according to Niemann
Size 030 and over are painted with RAL 5010 blue epoxy-polyester powder
PC, pre-stage reduction units available for motor power up to 2,2kW and size up to 090
Worm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, PC+NMRV
Automated manufacturing process not only guaratees fast service, but also reliability and quality
Worm gear reducers, combined and with pre-stage reduction unit
Features:
Sizes: 030-040-050-063-075-090-105-110-130-150
Available versions: SW - fitted for motor coupling, ISW - with input shaft, SWL - with torque limiter
Power up to 15 kW
Patented case with modern design. Up to size 105 feet or flange mounting, from size 110 universal mounting
Aluminuium units are supplied complete with synthetic oil which allows universal position mounting, with no need to modify lubricant quantity. Moreover units without plugs reduce the risk of oil oxidation and contamination.
Reduction ratios between 5 and 100
Max torque 1.550 Nm and admissible radial loads max 16.500 N
Cases up to 105 in die-cast aluminium alloy and over 110 in G200 grey cast iron
Worm wheel: bronze Cu Sn12 Ni2 (UNI7013-10)
Ground worm profile ZI (UNI4760)
Excellent mechanical strength while being especially lightweight
Load capacity calculated to BS721-83 and verified according to Niemann
Painted with RAL 5010 blue epoxy-polyester powder
PC, pre-stage reduction units available for motor power up to 2,2kW and size up to 090
Worm gear reducers are available with diffferent combinations: SW+SW, SW+ISW, PC+SW
