Wall Cantilever Jib Cranes
An ideal jib for maximizing headroom, the Wall Cantilever (WC200) provides hoist coverage and 200° rotation for individual use in bays, along walls or columns of plants, or as a supplement to an overhead crane or monorail system. The jib has the advantage of providing maximum lift for the hoist, since it can be installed very close to the underside of the lowest ceiling obstruction.
Two key requirements must be met before applying the Wall Cantilever Series:
- A structurally adequate wall or column to support the jib must exist. Sufficient clearance above the boom throughout its arc must exist.
Ease of Movement
The fittings contain bronze bushings and oil-impregnated bronze thrust washers which provide for easy rotation and superior load positioning.
Fabricated steel fittings provide excellent torsional rigidity.
Full Rated Capacity
Pre-engineered for use with powered hoists. A factor of 15% of the jib crane capacity is allowed for the hoist and trolley weight with an additional 25% of the capacity allowed for impact, thus giving full rated capacity use of the jib.
Ease of Installation
When the bracket center dimension is 6’ 0” or less, the mast/boom connection is welded. This provides the most economical means of installation.
When the bracket center is greater than 6’ 0”, a bolted mast/boom connection is used, which enables the larger cranes to be shipped disassembled for ease of handling during shipping and installation.
Grease fittings are provided for easy field lubrication.